Paradyne 3821PLUS manual Menu Structure, Modem Select

COMSPHERE 3821Plus Modem

Menu Structure

An elaborate menu of options is available from a Shared Diagnostic Control Panel (SDCP).

The menu tree is a hierarchical structure used to display functions that configure and control local and remote 3821Plus modems. It is accessed via the SDCP and is shown in its entirety in Appendix A.

The menu tree contains the following branches:

Modem Select	 Used to select one of the three
	modems on the card. The
	modem shown in uppercase
	characters is the modem
	connected to the SDCP.
Quick	 This hidden menu item
Configuration	displays information about the
Display	modem's configuration, such
	as line mode and rate.

Status	 Used to monitor the current
	status of the VF line and DTE
	interface as well as view the
	identity of the modem.
Test	 Used to begin and end various
	modem tests.
Configure	 Used to change and save the
	modem's configuration
	options.
Control	 Used to control the modem's
	hardware and software
	functions.
Remote	 Used to access and control a
	remote 3800Plus modem. See
	Chapter 6, Remote Access.
Security	 Used to control the modem's
	dial access security. See
	Chapter 7, Security.

Call Setup	 Used to dial, disconnect, and
	answer telephone calls as well
	as store up to 10 telephone
	numbers in directory locations.

(Modem Status)

MDMA mdmb mdmc

Call_Setup

Status

Test

Configure

Control

Remote

Security

495-14520-01

3-2 January 1999 3821-A2-GB20-40