Paradyne 3821PLUS manual Change Directory, 02
Nxt #

COMSPHERE 3821Plus Modem

Change Directory

Change Directory allows you to enter or modify telephone numbers. The modem has nonvolatile memory locations that allow you to store up to 10 telephone numbers. Each directory location can accept up to

40 characters; this includes the telephone number and dial command modifiers. Any telephone number dialed using the SDCP Dial command must appear in a directory location.

To access Change Directory from the Call Setup branch, make the following selections:

1.Press the key until Change Directory is displayed.

2.Press any function key to select Change Directory. The phone number listed in directory location 1 is displayed.

3.Select Nxt to display other directory locations.

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone number. If you want to change an existing telephone number in any of the ten directory locations, follow the same procedures.

To add a telephone number to a directory location, make the following selections:

02 :

Nxt￿￿￿￿" #

F1 F2 F3

Select Nxt until a blank directory appears on the LCD. (The cursor (
) always appears in the first character position.)

Select F2 (") or F3 (#) until the desired character is selected. This can be an alpha or numeric character. (See the Dn command in Table 4-1 in Chapter 4 for the meaning of the different dial command modifiers.)

02 : 9

Nxt￿￿￿￿" #

F1 F2 F3

Press the key to move the cursor to the next character position.

Continue this key sequence until the dial command modifiers and telephone number are entered.

01 : 9W5556789￿z

Nxt￿￿￿￿" #

F1 F2 F3

To save the number just entered, scroll to the next directory location by selecting Nxt. The number is now stored in nonvolatile memory.

3-10 January 1999 3821-A2-GB20-40