P
P (Pulse dial), 4-3Parity Bit, 3-20part numbers, G-1password
Administration, 7-1,7-8
number of DTE password tries, 7-9Originate Access, 7-2
Remote Access, 4-21remote access, 3-45Table, 7-4
types, 7-1Password Table, 7-4Pattern (Test branch), 3-14
Pause Time (for ª,º dial modifier), 3-31pin assignments
EIA-232-E, E-1
JM8 to RJ11 crossover cable, E-2NIM cable, E-3
primary channel, 6-1problems
echoing AT commands, C-2fax operation, C-4
high error rates, C-4leased line operation, C-2modem health, C-1modem will not answer, C-3modem will not connect, C-3modem will not dial, C-3unreadable data, C-2unsolicited disconnects, C-4
punchdown block, 2-2punchdown block wiring, E-3
Q
quick configuration display, 3-7quiet answer, 4-4
R
R (Reverse dial), 4-4
Receive Remote Loopback, 3-44Record (Status branch), 3-12recovering use of AT commands, 4-26redialing, automatic, 3-29,4-18remote access (S55), 4-21
Remote Access Password, 3-45,4-21Remote branch, 6-1
Remote Digital Loop, 3-14
Remote Mode Indicator, 1-4
remote modem Top-Level menu, 6-2Repeat Last Command (A/), 4-3Reset, 3-47
Reset (ATZ), 4-6
Reset Security, 7-8
Result Code Control (ATQ), 4-5
result codes, B-1enable/disable, 3-27,4-5extended, 4-6
format, 3-28,4-5
Result Codes Format (ATV), 4-5return to command mode, 4-4return to Online mode (ATO), 4-4ring number (S0), 4-16
RJ11 cellular Adapt (S93), 4-25RJ11 gang box, 2-2
RTS Action (&R), 3-22,4-10RTS-to-CTS Delay (S26), 4-18RTS/CTS Delay, 3-23
RX Buff Disc Delay, 3-43
S
S-registers changing, 4-5displaying, 4-5list of, 4-16
S0 (Auto-Answer Ring Number), 3-30,4-16S2 (Escape Character), 3-25,4-1,4-16
S3 (Carriage Return Character), 3-26,4-16S4 (Line Feed Character), 3-27,4-17
S5 (Backspace Character), 3-26,4-17S6 (Blind Dial Pause), 3-30,4-17
S7 (No Answer Timeout), 3-31,4-17S8 (ª,º Pause Time), 3-31,4-17
S10 (No Carrier Disconnect), 3-32,4-17
S12 (Escape Guard Time), 3-26,4-1,4-17S14 (Asymmetric Rate Mode), 4-18
S18 (Test Timeout), 3-44,4-18
S26 (RTS-to-CTS Delay), 3-23,4-18
S38 (DTR Continuous Repeat), 3-29,4-18
S39 (Receive Buffer Disconnect Delay), 3-43,4-18S40 (Auto Make Busy), 3-33,4-19
S41 (Dial Line Rate), 4-19
S43 (Train Time), 3-36,4-19
S44 (Leased Line Rate), 3-34,3-37,4-20
S45 (Leased Line Transmit Level), 3-38,4-20
S48 (Leased Line Carrier On Level), 3-38,4-20
S49 (Transmit Buffer Disconnect Delay), 3-43,4-21S55 (Access from Remote), 3-45,4-21
S56-S59 (Remote Access Password), 3-45,4-21S62 (V.25bis Coding), 3-28,4-21
S63 (V.25bis Idle Character), 3-29,4-22
S64 (V.25bis New Line Character), 3-29,4-22S66 (NMS Call Messages), 3-46,4-22
S69 (Make Busy Via DTR), 3-33,4-22
S74 (Network Position Identifier), 3-46,4-22
S75 (Network Management Address), 3-46,4-22S76 (Autorate ± Dial Line), 3-35,4-23
S77 (DTR Alarm Reporting), 3-46,4-23S78 (Automode), 3-35,4-23
S80 (No Data Disconnect Trigger Signal), 3-33,4-23S82 (Autorate ± Leased Line), 3-38,4-23
S84 (AT Command Mode), 3-28,4-24S85 (Fast Disconnect), 3-31,4-24
S88 (Straps When Disconnected), 3-45,4-24
S89 (V.42 ARQ Window Size Increase), 4-24
