Paradyne 3821PLUS manual Download Result, AT Command Indicates Reset Message, Common Indicates

SDCP Menus

	Table 3-1
	(3 of 3)
	Top-Level Menu Status
Call Disconnect	Indicates
Messages,
continued
LongSpace Disc	The modem has disconnected due to the detection of a long space.
NoData Disc	The modem has disconnected due to a lack of transmitted and received data.
Disconnecting	The modem has begun the disconnect sequence.
Rmt Cmnded Disc	The modem has disconnected due to a V.32 or V.34 Cleardown received from the remote
	modem.
Firmware	Indicates
Download Result
Messages
DownldOnly Mode	Indicates that a local download of firmware or a remote cloning of firmware has failed. The
	modem is currently in a Download Only mode in which only another download attempt is
	possible.
Frmware Upgrade	Indicates that a local download of firmware or a remote cloning of firmware was successful.
RemClone Failed	Displays on the local modem's LCD and indicates that a remote cloning of firmware has failed.
Remote Clone OK	Displays on the local modem's LCD and indicates that a remote cloning of firmware was
	successful.
AT Command	Indicates
Reset Message
Reset by ATcommand	The modem has performed a reset in response to an ATZ command.

	Table 3-2
	Common Operational Messages
Common	Indicates
Operational
Messages
Please Wait...	Appears when a command to a local device takes more than two seconds to complete.
Command Sent...	Appears when a command is sent to a remote modem.
No Rem Response or	Appears when a remote modem does not respond to a command within 5 seconds.
Remote Modem Fail
Command Complete	Appears when a command, issued to a local or remote modem, is completed.
Invalid Command	Appears when the modem cannot complete a command.

3821-A2-GB20-40 January 1999 3-5