Paradyne 3821PLUS manual Callback Security, Set Access Ctrl, SetAccessCtrl ResetSecurity

Security

Callback Security

Callback Security causes the responding modem to disconnect and call back to the phone number provided by the user at the originating modem. The user enters the number, when prompted by the remote modem, as a Directory location 1±10 preceded by the # sign, or as a complete telephone number (including the pause and wait dial modifiers). For example:

#1 Directs the remote modem to call back to the number stored in Directory 1

#10 Directs the remote modem to call back to the number stored in Directory 10

9W18005551234

Directs the remote modem to dial 9, wait for dial tone, and call back to 1-800-555-1234

If an invalid directory or telephone number is entered but the password is correct, the modem will stay online but will not conduct a callback sequence. The modem also will not initiate a callback if no directory or telephone number is specified.

Security Branch

The Security branch of the Top-Level menu allows you to change and save parameters that are critical to the dial access security password database. Most of the functions within this branch are protected by the Administration Password. Once the correct password is entered, these security functions appear on the modem's LCD. The major functions that appear under the Security branch are Set Access Control and Reset Security.

(Modem Status) MDMA mdmb mdmc

Call_Setup Status Test Configure Control Remote

Security

Set_Access_Ctrl Reset_Security

(Admin Password?)

EditPassWdTable Set_Orig_Secur Set_Admin_PsWd

Set_Answer_Sec Set_CallBack_Sec

495-14847

Set Access Ctrl

Set Access Control contains the Edit Password Table, Set Answer Security, Set Originate Security, Set Callback Security, and Set Administration Password configuration groups.

3821-A2-GB20-40 January 1999 7-3