Paradyne 3821PLUS manual Dial Access Security Messages, Dial Access Indicates Security Messages

COMSPHERE 3821Plus Modem

	Table 3-3
	Dial Access Security Messages
Dial Access	Indicates
Security
Messages
Get VF PsWd	The answering modem is waiting for the originating caller to transmit a VF password.
Get DTE PsWd	The answering modem is waiting to receive a valid DTE password from the remote DTE.
VF PsWd Timeout	The modem did not finish answering a call (disconnected) because the allowed time limit was
	exceeded before the modem received a VF password from the originating dialer.
Unknown DTEpswd	The modem did not finish answering a call (disconnected) because the DTE passwords received
	from the remote DTE were invalid.
No Orig PsWd	The modem did not attempt to establish a call as requested because the AT dial command did not
	contain an originate access password.
Unknown VF PsWd	The modem did not finish answering a call (disconnected) because the modem received an
	invalid VF password.
DTEpswd Timeout	The modem did not finish answering a call (disconnected) because the allowed time limit was
	exceeded before the modem received a DTE password from the remote DTE.
Inval Orig PsWd	The modem did not attempt to establish the call as requested because the originate password in
	the AT dial command was not valid.
DTR Dial Blocked	Appears if DTR dialing is used and Answer Access or Originate Access security is enabled. DTR
	dialing is not permitted when security is enabled.
SecurityBlocked	Appears only when the modem is in base mode (a mode that occurs during a firmware download)
	and Answer Access Security is enabled. In this case, the access verification capabilities are not
	available and the modem does not pass data to the DTE under any circumstances.

3-6 January 1999 3821-A2-GB20-40