Philips DP-C262 Transmission with Destination Monitoring, Place Originals, Press the Fax key

Chapter 2 Basic Fax Transmission

24

Transmission with Destination Monitoring

Select “Monitor” on the touch-panel screen to obtain a dial tone. This feature is called “on-hook dialing.”

To monitor the status of a remote station, follow the steps below:

1 Place Original(s).
zIf the platen is used, only one page can be	Raises the monitor volume.
transmitted at a time.

zRefer to Placing Originals (Facsimile/Internet

Fax) in the Operating Instructions (For Basic	Lowers the monitor volume.
Operations) of provided booklet.

2 Press the Fax key.
			Select once to recall the
3 Select “Monitor”.
			last dialed fax number.
			Select twice to insert a
			pause (dialing interval).
	5	When you hear a beep, press the
		Start key.
		The original(s) are stored into memory with a
		file number. Then starts dialing the telephone
		number.
		zFor instructions on how to cancel
		transmission, refer to Canceling a
		Communication (see page 46).
The monitor screen appears and you will hear		zPress Reset key to return the machine to
a dialing tone through the monitor speaker.		the initial screen of the current active mode.
4 Enter the fax number of the
destination.