Philips DP-C262 manual Verification Stamp, Place Originals Set Quality Adj. as required

Chapter 2

Verification Stamp

This function confirms successful transmission or storage into the memory by stamping at the bottom of each successfully transmitted original(s) with a small “x” mark.

Verification Stamp

Ex: Scanning Direction

Basic Fax Transmission

34

zThe standard setting of the verification is Off. It stamp can be changed with “04 Stamp (HOME)” in Function Parameters (Fax/Email Settings> Fax Parameters). For instructions on how to change the standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

zThe machine can be configured not to stamp the documents stored in the memory by changing the setting

“28 Stamp at Memory XMT” in Function Parameters (Fax/Email Settings> Fax Parameters). For instructions on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

zVarification Stamp function is only available when scanned with the ADF.

1	Place Original(s).	5	Set “Quality Adj.” as required.
	zRefer to Placing Originals (Facsimile/Internet		zRefer to Setting Original Quality (see page
	Fax) in the Operating Instructions (For Basic		26).
	Operations) of provided booklet.	6	Select a destination.
2	Press the Fax key.
3	Select “Basic Menu”.

zRefer to Entering a Destination (see page 16).

4	7 Press the Start key.
	Select “Verification Stamp”.
	The original(s) are stored into memory with a
	file number. Then starts dialing the telephone
	number.
	zSetting of "Verification Stamp" is returned
	to Off after finished transmission.