Philips DP-C262 manual Basic, Fax, ‰ Number Pad Screen, ‰ Using Pause, ‰ Using ＊

‰Number Pad Screen

Inserts a pause each time it is selected. The pause is represented by a “-” symbol.

Used to access some features of your PBX.

Select when entering a sub-address number.

The sub-address is represented by an “s” symbol.

Select when entering additional destinations.

z Do not select “Set” for single destination.

Select "Clear" to delete an erroneous entry, one digit at a time.

‰ Using “Pause”

zIf you are using a PBX, enter the external
access number first, and then select	Chapter2
“Pause” before entering the fax number.
Ex:
Enter 9 for the outside access number,
select “Pause,” and then enter the fax
number.
Pause symbol	Basic
‰ Using “ ＊ ”
zChange dialing method from pulse to tone
dialing at a desired dialing moment.
Switching to tone dialing is represented by a
“/” symbol.	Fax
Ex:
After entering 9, select “＊” to switch to tone
dialing.	Transmission
Tone symbol
‰ Using “Sub-Address”
zSelect “Sub-Address” to enter a sub-
address destination after the fax number.
Refer to Sub-Address Communication
(see page 66).
Ex:
After entering 4, select " Sub-Address", and
enter the Sub-Address.

Sub-Address symbol

3 Press the Start key.

The original(s) are stored into memory with a file number. Then starts dialing the telephone number.

17