The HeartStart FR2+ Defibrillator

Clockwise from top right.

ABattery. Standard long-life or rechargeable battery used to power the FR2+. (Check local regulations for disposal and recycling requirements.)

BOn/Off button. Turns on the FR2+ and starts voice and screen prompts. Second press turns off the FR2+.

CStatus Indicator. Shows you the readiness status of the FR2+.

DDisplay screen. Displays text prompts and incident data. The FR2+ M3860A screen also displays the patient’s ECG.

EOption buttons. Adjust the contrast of the screen display and control special functions.

FBeeper port. Broadcasts alert beeps when required. It is located under the right edge of the FR2+.

GInfrared (IR) communications port. A special lens, or “eye,” used to transfer data directly to or from another device.

HData card port. Receptacle for data card tray.

IData card (optional). Used to store and review information about an incident, including ECG and optional voice recording.

JData card tray. Special sleeve that holds the data card and fits into the data card port to help seal the FR2+ against fluids. The tray should be kept installed in the FR2+ even if no data card is used.

KMicrophone. Used optionally to record surrounding audio during an incident. It is located under the right edge of the FR2+.

LShock button. Controls shock delivery. The button flashes when the HeartStart FR2+ is ready to deliver a shock.

MSpeaker. Amplifies voice prompts during use of the FR2+.

NPads placement diagram. Illustrates correct placement of pads. Diagrams are also shown on the defibrillator pads.

ODefibrillator pads connector socket. Receptacle for connector of the defibrillator pads cable. An adjacent LED light flashes to show socket location and is covered when connector is inserted.

PAdult defibrillator pads. Self- adhesive pads with attached cable and connector.

P hilip s Med ical Systems

Page 2
Image 2
Philips M3861A, M3860A manual HeartStart FR2+ Defibrillator