Philips M3860A, M3861A manual Technical Specifications

B

	B	Technical Specifications
		The specifications for the HeartStart FR2+ provided in this chapter apply to
		both the M3860A and M3861A, unless otherwise noted. Additional
		information can be found in the Technical Reference Manual for the FR2
		Defibrillator, located online at www.medical.philips.com.
		HeartStart FR2+ Defibrillator Specifications
		Physical
	category	nominal specifications
	Size	2.6" high x 8.6" wide x 8.6" deep (6.6 cm x 21.8 cm x 21.8 cm).
	Weight	Approximately 4.7 lbs (2.1 kg) with M3863A FR2 standard battery installed.
		Approximately 4.5 lbs (2 kg) with optional M3848A FR2+ rechargeable battery
		installed.
		Environmental
	category	nominal specifications
	Operating Temperature	32° to 122° F (0° to 50° C).
	and Humidity	0% to 95% relative humidity (non-condensing).
	Standby Temperature	32° to 109° F (0° to 43° C).
	and Humidity	0% to 75% relative humidity (non-condensing).
		Applies to HeartStart FR2+ with battery installed and stored with defibrillator
		pads.
stemsSy
	Altitude	Meets MIL-810E 500.3, Procedure II (-500 feet to 15,000 feet).
dicalMe	Shock/Drop Abuse	Meets MIL-STD-810E 516.4, Procedure IV (after a 1 meter drop to any edge,
	Vibration	Meets MIL-STD-810E 514.4-17.
	Tolerance	corner, or surface, in standby mode).
ps
	Sealing
hiliP		With data card tray and battery installed, meets IEC 529 class IP54.
	ESD	Meets EN 61000-4-2:1998 Severity Level 4.
	EMI (Radiated)	Meets EN 60601-1-2 limits (1993), method EN 55011:1998 Group 1 Level B.

B-1