Philips M3860A, M3861A manual Optional M3848A FR2+ rechargeable battery

P hili ps Me dical Sy stems

	B-7	B
	(Optional) M3848A FR2+ rechargeable battery
category	nominal specifications
Battery Type	11.3 VDC, 6.5 Ah, lithium ion. Rechargeable cell using the M3849A charger.
Capacity	When freshly charged and used at 77° F (25° C) , provides a minimum of 80
	(typically 100) shocks, or 3.5 hours (typically 5 hours) of ECG display time only,
	before recharging is indicated.
Status Indicators	Good battery: bar graph on display screen indicating remaining power level.
	Low battery: flashing red X on the front panel of the FR2+ (When low battery
	indicator appears, there is still enough energy to deliver 9 shocks plus 15 minutes
	of ECG display time).
	Dead battery: solid red X on the front panel of the FR2+.
Storage Temperature	32° to 109° F (0° to 43° C).
Standby Life	6 months when installed fully charged in a defibrillator labeled FR2+.
(after installation)
	(Optional) M3849A charger
category	nominal specifications
Application	For use with M3848A FR2+ rechargeable battery only.
Power Requirements	100 to 240 VAC, 47 to 63 Hz, 30 Watts
Environmental	32° to 122° F (0° to 50° C).
Requirements	0% to 95% relative humidity (non-condensing).
Conformance Testing	International: EN60335-1:1994 Class 1
	North America: UL 1310 Class 2
	M3870A and DP2/DP6 defibrillator pads
category	nominal specifications

Pads, Cable, and Connector Disposable and self-adhesive. DP2/DP6 adult defibrillator pads have a nominal active surface area of 100 cm2 each and are provided in a sealed package with an integrated 122 cm (48 inch), typical, cable and connector. M3870A FR2 infant/child reduced-energy defibrillator pads have a nominal active surface area of 44 cm2 each and are provided in a sealed package with an integrated 122 cm (48 inch), typical, cable and connector incorporating attenuating electronics.

Technical Specifications