Downloading Training Data to a Computer with
Polar Precision Performance Software
Polar S410 offers an easy way to | Sampling rate | Exercising time | |
analyse training data by | 15 s | - 30 min | |
30 s | 30 min - 1 h | ||
computer afterwards. It starts | |||
recording at a sampling rate of 15 | 1 min | 1 h - 2 h | |
seconds up to 120 samples. When | 2 min | 2 h - 4 h | |
4 min | 4 h - 8 h | ||
the memory is full, it is compressed | |||
and a longer averaging period is | 8 min | 8 h – 16 h | |
used (30 s, 1 min, 2 min, 4 min or |
|
| |
|
|
8 min) depending on the recording time. Maximum recording time is 16 hours. The table shows the exercise times for each sampling rate.
To be able to transfer the recorded training information via SonicLink™ and to analyse it with Polar Precision Performance software version 4 or later, you need a personal computer with a sound card and microphone. To make sure that the training information transfer will be successful, check that there are no interfering sounds near the computer.
You can transfer only your complete files to a computer
1.Start the software.
2.Activate the download function of the software and follow the directions on screen.
3.If the receiver is in the Time of Day display scroll up or down until CONNECT is displayed. Make sure that start is displayed.
E 60
