MGC Hardware and Installation Manual
Audio Card | Message Card |
Female Connector
Male Connector
a | a |
|
b | Line Up Holes | b |
| to Secure Cards |
|
6.Slide in the Audio module.
7.Push the Audio module firmly into the backplane, making sure it is properly seated in its slot.
8.Tighten the screws on the front panel of the MGC unit to secure the Audio module.
Attaching the Music I/O Card to the Audio Module
The Music I/O card is used to attach an external audio device such as a tape recorder or CD player to playback music or recorded messages to participants waiting in the Welcome queue during Greet and Guide conferences.
The Music I/O card is inserted in the rear panel of the MGC unit, and it is attached to the Attended Audio module.
To install the Music I/O card in the rear panel of the MGC unit:
1.Carefully slide the Music I/O card into the slot in the backplane where the Attended Audio module is inserted in the front.
