Polycom DOC2237A manual Stby Fail Active

Chapter 5 - System Maintenance

The three Functional Module LEDs function as a group. Each state of the Functional Module and its associated LED array is described in Table 5-2. The (IDLE, ACTIVE, FAILURE, and PARTIAL FAILURE) states are the operational modes of the Functional Module. The (RESET, WAITING FOR MCMS and LOADING SOFTWARE) indicates the stages during the startup procedure of the Functional Module.

Figure 5-2: Function Module LEDs

Module State	STBY	FAIL	ACTIVE
IDLE—Ready, but not used in a	ON	OFF	OFF
conference
ACTIVE—Used in one or more	ON	OFF	ON
conferences
FAILURE—Error state; board is	OFF	ON	OFF
out of operation
PARTIAL FAILURE—Error state;	ON	Flashing	ON/OFF
part of board is out of operation
RESET—Board is in Reset state	ON	ON	ON
TEST—Power-on self test	OFF	OFF	Flashing
WAITING FOR MCMS—Waiting	Flashing	Flashing	OFF
for MCMS to start loading software
LOADING SOFTWARE	ON	Flashing	OFF

5-6