Polycom DOC2237A manual Isdn network connection

MGC Hardware and Installation Manual

ISDN network	ISDN Network connection	ISDN Network connection
connection	for 4 spans	for 8 spans

Figure 2-14: ISDN network connection

•Leased lines should be connected using an adapter with a screw connector for solid conductor wires with a diameter in the range 0.4 to 0.6 mm. Use Polycom P/N CBL0602A or similar adapter.

Connect one side of the adapter to the NET RJ-45 jack on the rear panel of the MGC. Then connect the leased line wires to the other side of the adapter.

The ISDN and T1-CAS network properties must be defined in the Network Services. For details, see the MGC Administrator’s Guide, Chapter 3.

2-29