Polycom DOC2237A manual Option Description

Chapter 2 - Hardware Installation

Table 2-2: IP Configuration Options

Option	Description
IP Address	The system displays the currently defined IP
	address. Enter the IP address allocated to the
	MCU by the network administrator.
Subnet Mask	Enter the Subnet Mask of the MCU.
Default Gateway	Enter the IP Address of the default gateway/
	router.

11.Click OK.

12.Exit the MGC Manager and switch OFF the MCU.

13.Disconnect the MCU from the cross-over cable.

14.Connect the MCU to your site’s network.

15.Switch ON the MCU.

a. Right-click the MCU icon, and then click Properties.

2-38