Polycom DOC2237A manual MGC-100 Hardware Installation, Unpacking and Positioning the MGC-100

Chapter 2 - Hardware Installation

MGC-100 Hardware Installation

Unpacking and Positioning the MGC-100

To unpack and position the MGC-100:

1.When you receive your MGC-100, inspect the equipment for damage and verify that the components match the packing slip. If you did not receive a component or if there is damage to the system, notify your service representative immediately.

Wood Packing Case

Carrying Strap

Lock in Closed Position

Lock in Open Position

Figure 2-1: MGC-100 package

2.Place the MGC-100 unit on a stable flat surface in a location that meets the MGC environment requirements, which are:

•Operating temperature: 10°–40°C (50°–104°F)

•Humidity: 15%–90% non-condensing

•Altitude: Up to 3,000m (10,000ft)

•ESD: +8 kV

2-2