Chapter 4 - Hardware Description
Installing the Audio Message Daughter Card on the standard Audio Module
1.Unscrew the screws on the front panel of the MGC unit that secure the Functional Module.
2.Unlatch the top and bottom latches by pressing up and away the top latch and down and away the bottom latch.
Top latch |
AUDIO |
Stby |
Fail |
Active |
Bottom latch |
3.Use the plastic latches to pull the Functional Module out of its slot in the Backplane.
4.Carefully slide the Audio Module out through the front panel.
5.Press firmly the male connector on the Audio Message daughter card into the slots of the female connector on the Audio functional module while lining up holes A and B.
Audio Card
Message Extension
