Powerware 10001100 kVA operation manual Repo Operation

UPS OPERATING INSTRUCTIONS

C A U T I O N

Do not attempt to restart the system after the REPO until the cause of the shutdown has been identified and cleared.

2.To deactivate the REPO switch in preparation for restarting the UPS, insert the supplied key and rotate clockwise until the red pushbutton releases (see Figure 7-7). To remove the key, rotate the key back to the vertical position.

3.Restart the UPS by following the procedure in paragraph 7.3.1 on page 7−11 or 7.3.2 on page 7−12.

W A R N I N G

Power is present inside the UPS cabinet until the upstream input feeder circuit breaker is opened.

Activated

Pushbutton locked into place

Deactivated

Unlock pushbutton to release

Figure 7-7. REPO Operation

EATON Powerware® 9395 UPS (1000–1100 kVA) Installation and Operation Manual S 164201764 Rev 1 www.powerware.com 7−19