Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed using special key presses. Read this section if you want to:
•Set the pause or
•Set the maximum speed limit
•View the odometer
•Display the number of hours you have used your treadmill
•View the software versions and part numbers
•Display the serial number
•Check the usage log
•Check the error log
Advanced Programming Tips
•Always start at the Precor banner.
•The advanced programming and diagnostic mode is accessed by pressing the red STOP button at the Precor banner. Any remaining key presses must occur quickly and without pause.
•The QUICKSTART key is disabled while in programming mode.
•The number keypad is disabled once you enter advanced programming mode. You need to use the navigational arrow keys to change the blinking prompts.
•Some keys provide the same functionality and can be used interchangeably while in advanced programming mode. These keys are:
OK and ENTER
PAUSE/RESET and the red STOP button
•The advanced programming prompts appear sequentially and in a menu format. Pressing the arrow keys in the navigational keypad moves you through the programs. Press OK to choose or accept the displayed selection. To return to the Precor banner without saving any changes, press PAUSE/RESET or the red STOP button.
Owner’s Manual: Advanced Programming and Troubleshooting | 59 |
