Attach the power cord clips (F).
Important: Use the power cord clips to secure the power cord to the base frame beneath the hood. This reduces the possibility that the power cord will get pinched or damaged by the incline lift movement. If the power cord runs along the length of the treadmill, use the power cord clips to secure it to the side rail.
1. Wrap the clip around the power cord near the power switch at the front of the treadmill and clamp it shut.
Power cord clip
2.Insert the serrated portion of the clip into the hole located under the front of the unit on either side of the power switch.
3. Place the clips, as needed, along | Side rail |
the length of the power cord |
|
while you redirect it to the power |
|
outlet. The holes, found in the |
|
frame beneath the side rail, are |
|
spaced 12 inches (31 cm) along |
|
the length of the side rail. |
|
| Power cord |
Level the unit. Before using on the unit, make sure it is level.
Important: If the load is not equally compensated, you will feel excessive vibration or movement at the display console. Adjust one rear foot at a time. Do not raise the unit beyond
Adjustable |
rear foot |
Bubble |
level |
1.Place a bubble level on the running belt to see if the treadmill is level. If the treadmill needs leveling, continue to step 2.
2.Situate yourself next to the adjustable rear feet.
3.Ask a capable assistant to lift the rear portion of the treadmill (using proper lifting techniques).
4.Level the treadmill by adjusting the rear feet as needed.
Important: If the unit is placed on a slightly uneven surface, rotating the rear feet can help, but will not compensate for extremely uneven surfaces.
5.Recheck the level of the treadmill with the bubble level on the running belt after each adjustment.
6.Make adjustments to the rear feet so that the your weight on the treadmill is distributed evenly.
Plug the power cord into an appropriate outlet.
Important: The treadmill requires a dedicated, grounded circuit. A
M9.57 | 7 |
