Q-Logic 9000 manual Operations and Administration, Chassis Viewer

Section 2

Operations and Administration

2.1

Chassis Viewer

Chassis Viewer is SilverStorm™ browser-based device management software. Chassis Viewer provides the primary management interface for the SilverStorm 9000 switches, allowing the user to perform management, configuration, and monitoring tasks related to InfiniBand networks.

❥Chassis Viewer runs on the Chassis Management Unit (CMU) of the 9024 and each managed spine/management module of the MPFD series (9020, 9040, 9080, 9120 and 9240).

❥The browser must be on a workstation which has connectivity to the RJ-45 OOB LAN port on the switch.

❥Management Workstation Requirements

❥ Browser Level: Internet Explorer 6.0+ or Mozilla 1.6.x+

❥To access Chassis Viewer, point a browser to the IP address of the switch.

❥If user authentication is enabled, the following screen is displayed:

Figure 2-1.

❥Enter the default user name and password:

❑Username: admin

❑Password: adminpass

The Chassis Viewer home page is displayed.

The Chassis Viewer manages:

❥The switch chassis.

D000003-006 Rev. A 2-1