Manuals / Q-Logic / Computer Equipment / Network Hardware

Q-Logic 9000 manual InfiniBand Statistics

Models: 9000

1 150

Download 150 pages 37.55 Kb

Page 54

InfiniBand Statistics:

2 – Operations and Administration Configuration and Monitoring Features

Q

2.2.9.1.1

InfiniBand Statistics:

Transmit 32 Bit Words:

The number of 32-bit data words transmitted by the port, not including flow control and VCRC data.

Receive 32 Bit Words:

The number of 32-bit data words received by the port, not including flow control and VCRC data.

Transmit Packets:

The number of data packets transmitted by the port, not including flow control packets.

Receive Packets:

The number of data packets received by the port, not including flow control packets. Symbol Errors:

The number of times a 8B10B encoding violation, or a disparity violation was detected. If multiple errors are detected simultaneously (in more than one lane), the counter only increments by one. The value of the counter is not incremented past 65535. The Performance Manager may reset and/or consolidate the results of this counter.

Link Error Recovery:

Indicates the number of times the link error recovery process happened successfully. The value of the counter is not incremented past 65535. The Performance Manager may reset and/or consolidate the results of this counter.

Link Downed:

The number of times the link error recovery process failed. The value of the counter is not incremented past 65535. The Performance Manager may reset and/or consolidate the results of this counter.

Receive Errors:

Number of errors received on the port. Remote Physical Errors Received:

Indicates bit errors on a link other than the physically attached link. Transmit Discards:

Number of port transmit discards.

2-42	D000003-006 Rev. A

Image 54

Q-Logic 9000 manual InfiniBand Statistics

Contents

D000003-006 Rev. A SilverStorm 9000 Users GuideS i m p l i f y PageSilverStorm 9000 Users Guide PageD000003-006 Rev. A Page SilverStorm 9000 Users GuideD000003-006 Rev. A Linux is a registered trademark of Linus TorvaldsFirst Published March Printed in U.S.A SilverStorm 9000 Users Guide2007 QLogic Corporation. All rights reserved worldwide PageSection Operations and AdministrationFVIC Configuration and Monitoring Features IntroductionEVIC Configuration and Monitoring Features Appendix A Troubleshooting and Technical ReferenceSection InfiniBand Troubleshooting ScenariosA.2.1 SilverStorm 9000 Users GuideSilverStorm 9000 Users Guide PageD000003-006 Rev. A License Agreements IntroductionIntended Audience SectionTechnical Support Availabilitysupport.qlogic.com Contact InformationSupport Headquarters North American Region1 - Introduction Technical Support D000003-006 Rev. AOperations and Administration Chassis ViewerSection Home Page Figure 2-2. SilverStorm 9024 Home PageFigure 2-3. SilverStorm 9240 Lower Hemisphere Home Page Figure 2-5. Support Button Displaying the Chassis ViewFigure 2-4. Help Button Figure 2-6. Support Contact ScreenFigure 2-7. Leaf/VIO Module Chassis Mouseover Figure 2-8. Spine Module Chassis MouseoverFigure 2-9. 9240 Chassis View Displaying the Leaf/VIO and Spine Module ViewsLeaf Module View Figure 2-10. Leaf Module MouseoverFigure 2-12. VIO Module Mouseover VIO Module ViewFigure 2-11. Leaf Module View Figure 2-13. VIO Module ViewFigure 2-14. Spine Module Mouseover Spine Module ViewComponent Details Area Figure 2-15. Spine Module ViewFigure 2-17. Details Header Details HeaderFigure 2-16. Component Details Area Figure 2-18. Leaf/VIO and Spine Information AreaModifying Switch Component Information Figure 2-19. Chassis View Component Information AreaFigure 2-21. Reboot Window Rebooting the 9024 SwitchRebooting the MPFD switches using Chassis Viewer Figure 2-22. Reboot ScreenRebooting Multiple Managed Spines using the CLI Chassis View Component Information Area TabsLEDs and Sensors Tab System TabFigure 2-23. LEDs and Sensors Tab Chassis FRU Tab Power Tab Backplane Tab Configuration and Monitoring FeaturesFan Tab Chassis View MenuSet Level Figure 2-27. Log System Configurator Device TabLogging Figure 2-25. Logging SubmenuFigure 2-28. Device Tab Software Module Configurator DEBUG1 - Messages that describe the states of connections and links Figure 2-30. Log System Configurator Syslog Host Tab Preset TabFigure 2-29. Log System Configurator Preset Tab Syslog TabFigure 2-31. Reset Levels Button Configure Syslog on the Syslog ServerReset Log Levels Figure 2-32. Reset Log Levels WindowFigure 2-33. Maintenance Menu MaintenanceFirmware Update Figure 2-34. Firmware Update ButtonLDAP Configuration Figure 2-36. LDAP Configuration ButtonHTTP/CLI Session Configuration Figure 2-37. LDAP Authentication ScreenFigure 2-38. HTTP/CLI Session Config Button Figure 2-39. HTTP/CLI Session Configuration Screen Figure 2-40. User Authentication Dropdown List2. Select Target Configuration Target ConfigurationFigure 2-42. Target MIB Configuration Button SNMPFigure 2-43. SNMP Target Configuration Window Target Configuration Window Field Descriptions Page Filter Status Figure 2-44. Filter Status ButtonSet Community Strings Figure 2-45. SNMP Filter Status ScreenFigure 2-46. Set Community Strings Button Configuration File Administration Figure 2-48. Configuration File Administration MenuFigure 2-47. Set Community Strings Window 2. Click Config File Admin AdministerFigure 2-49. Configuration File Administration - Administer Figure 2-50. Configuration File Administration ScreenFigure 2-52. Configuration File Administration - Host Up/Download Host Upload/DownloadFigure 2-53. Configuration File Upload/Download Screen Figure 2-54. Upload ScreenFigure 2-55. Trap Control Figure 2-56. Configuration File Trap Control ScreenTrap Control 2. Click Config File AdminChassis Traps Figure 2-57. Chassis Trap Control2. Click Trap Control. The Chassis Trap Control screen is displayed Figure 2-58. Chassis Trap Control ScreenSlot Group icsChassisTrapModuleNotResponding Port Statistics Figure 2-59. IB Port StatisticsUnderstanding Port Naming Conventions Figure 2-60. Chassis IB Port StatisticsPort Statistics Field Descriptions InfiniBand Statistics Leaf and Spine Module IB Port Statistics Leaf ModulesFigure 2-61. Leaf Port Stats Menu Spine Modules Figure 2-62. Leaf Port Statistics WindowFigure 2-63. Spine Port Stats Menu Set Field Thresholds Figure 2-64. Spine Port Statistics WindowFigure 2-65. Set Field Thresholds Figure 2-66. Set Field Thresholds Screen portXmitDataThresh Time Service Figure 2-67. Switch Time ServiceFigure 2-68. System Time Information Screen Figure 2-69. Time Service - NTP Setup Figure 2-70. Time Service - Manual Setup1. Click the Use Network Time Protocol? checkbox Configuring the Switch OOB IP Address Figure 2-71. Time Service - Time Zone/Daylight Saving Time SetupFigure 2-72. Set Switch OOB IP Address Button Figure 2-74. Set Switch Default Gateway IP Address Button Configuring the Switch Default Gateway IP Address1. From the OOB LAN IP submenu, click Set Default Gateway IP Figure 2-75. Set Default Gateway IP WindowAutomatically starting the Fabric Manager Fabric Manager ConfigurationFigure 2-77. Subnet Manager Configuration Window Figure 2-76. Subnet Manager SubmenuDetermining the Active Fabric Manager The smquery ApplicationInstalling smquery from an Embedded Product CD Running smquery Quick StartFor the Embedded Fabric Manager Running smquery smShowConfigsmSetConfig smShowStatusCommand Syntax and Options smShowSwitchessmShowServices smShowGroupsSpine View Menu Figure 2-78. Spine View MenuFigure 2-80. View Log Button Viewing the LogFigure 2-79. Logging Submenu Figure 2-81. Sample Message Log4. Select Edit, Paste or CTRL + Purging the Log2. Select Edit, Copy or CTRL + C Figure 2-82. Purge Log ButtonFigure 2-85. Boot Image Selection Screen Select Boot ImageFigure 2-84. Select Boot Image Button Figure 2-86. Boot Image File Pop UpFigure 2-87. Subnet Manager Submenu Accessing the Subnet Manager Control WindowFabric Manager Control Figure 2-88. Subnet Manager Control ButtonStarting the Fabric Manager Restarting the Fabric ManagerFigure 2-89. Subnet Manager Control Window Stopping the Fabric Manager License Keys Key Administration2. Click Key Administration. The Key Management window is displayed Adding a New License KeyFigure 2-93. License Key Submenu Deleting a License KeyFigure 2-92. License Key Management Information Window Figure 2-94. Key Management WindowD000003-006 Rev. A 2 - Operations and Administration4. Click OK to delete 2-652 - Operations and Administration Spine View Menu 2-66D000003-006 Rev. A Figure 3-2. Logging Submenu FVIC Configuration and Monitoring FeaturesFigure 3-1. FVIC Menu Logging2. Select Edit, Copy or CTRL + C Figure 3-3. View Log ButtonFigure 3-4. Sample Message Log 4. Select Edit, Paste or CTRL +Figure 3-6. Log System Configurator Device Tab Figure 3-5. Set Level ButtonSet Level Figure 3-7. Device Tab Software Module Configurator Page Preset Tab Figure 3-8. Log System Configurator Preset TabFigure 3-9. Reset Levels Button Reset Log LevelsFigure 3-12. Purge Log Confirmation Window Figure 3-10. Reset Log Levels WindowFigure 3-11. Purge Log Button Purging the LogMaintenance Figure 3-13. Select Boot Image ButtonFigure 3-14. Boot Image Selection Screen Select Boot ImageFibre Channel Configuration Figure 3-15. Boot Image File Pop UpFigure 3-16. Fibre Channel Configuration Submenu Figure 3-18. FCP Port Configuration Screen FCP Port ConfigurationFigure 3-17. FCP Port Configuration Figure 3-19. FCP Interconnect - Set SpeedFCP Device Discovery Figure 3-20. FCP Interconnect - Set TopologyFigure 3-21. FCP Device Discovery Button Figure 3-22. Fibre Channel Target Device Configuration Window Figure 3-23. Discovered Devices TableFigure 3-24. Configuring a Discovered Target Figure 3-25. Configured Target Devices TableDiscover the SRP Initiators SRP Initiator Discovery and ConfigurationManually Configure each SRP Initiator Port Use WildcardingFigure 3-26. SRP Initiator Discovery and Configuration Button Figure 3-27. Fibre Channel SRP Initiator Configuration WindowFigure 3-29. Configuring a Discovered Initiator Figure 3-30. Configured Initiators TableFigure 3-28. Discovered Hosts Table Figure 3-31. Click to Add Host Button Figure 3-32. Add Host WindowFigure 3-33. Add Host Window Wildcarding Figure 3-34. SRP Initiators WildcardingSRP Map Configuration Figure 3-35. SRP Map Configuration ButtonFigure 3-36. SRP Map Configuration Window Figure 3-38. Map Configuration Wizard Figure 3-37. Click to Add LinkDeleting a Configured Map Figure 3-39. Map Configuration Wizard - StepFigure 3-40. Initiator and Map Configuration Information Figure 3-41. Deactivate ButtonFigure 3-43. Map Deletion Successful Message StatisticsFigure 3-42. Inactive Entry Status and Delete Map Button Figure 3-44. Statistics SubmenuInfiniBand Port Statistics Figure 3-45. IB Port StatisticsFigure 3-46. FVIC IB Port Statistics Port Statistics Field Descriptions InfiniBand Statistics FCP Target Device Statistics Figure 3-47. FCP Target Device Statistics ButtonFigure 3-48. FCP Target Device Statistics Window 128 512 1024 2048 Out Frame Size SRP Initiator Statistics Figure 3-49. SRP Initiator Statistics ButtonFigure 3-50. SRP Initiator Statistics Window Fibre Channel Port Statistics Figure 3-51. FC Port Statistics ButtonFigure 3-52. FC Port Statistics Window Fibre Channel Trap Control Figure 3-53. Fibre Channel Trap Control Submenu2. Click Trap Control Figure 3-54. FC Trap Control Screen Figure 4-2. Logging Submenu EVIC Configuration and Monitoring FeaturesFigure 4-1. EVIC Menu Logging2. Select Edit, Copy or CTRL + C Figure 4-3. View Log ButtonFigure 4-4. Sample Message Log 4. Select Edit, Paste or CTRL +Figure 4-6. Log System Configurator Device Tab Figure 4-5. Set Level ButtonSet Level Figure 4-7. Device Tab Software Module Configurator Page Preset Tab Figure 4-8. Log System Configurator Preset TabFigure 4-9. Reset Levels Button Reset Log LevelsFigure 4-12. Purge Log Confirmation Window Figure 4-10. Reset Log Levels WindowFigure 4-11. Purge Log Button Purging the LogMaintenance Figure 4-13. Select Boot Image ButtonFigure 4-14. Boot Image Selection Screen Select Boot ImageConfiguration Figure 4-15. Boot Image File Pop UpFigure 4-16. Configuration Menu Virtual NIC Information Figure 4-17. Virtual NIC ButtonFigure 4-18. Virtual NIC Information Window Last Host Name The name of the host that last used the IOC Configure Pause Figure 4-19. Configure PauseFigure 4-20. Pause Capability Window Figure 4-21. Configure MTU Size Configure MTU SizeViPort Count Configuration Figure 4-22. MTU Capability WindowVLAN Configuration Figure 4-23. VPort CountFigure 4-24. ViPort Count Window Figure 4-25. VLAN Configuration Figure 4-26. VLAN Configuration Window Ethernet PortsPort Type Ethernet Egress Rule Figure 4-27. VLAN Configuration Window Host Ports Port Type HostPage Page VLAN Configuration Example Figure 4-28. VLAN Configuration Example Ethernet PortsFigure 4-29. VLAN Configuration Example Host Ports VLAN Setup Host Interface ConfigurationFigure 4-30. VLAN Setup Ethernet Port Configuration EVIC ConfigurationHost Port Configuration vlanEgressRuleSet vi 56Alternative VLAN Setup Figure 4-31. Alternative VLAN SetupAdditional Notes Link Aggregation Figure 4-32. Link AggregationFigure 4-33. Link Aggregation Window Current Agg # Maximum Packet Age Figure 4-34. Maximum Packet AgeFigure 4-35. Maximum Packet Age Window Port Mirroring Figure 4-36. Port MirroringFigure 4-37. Port Mirroring Window Statistics Figure 4-38. Statistics SubmenuFigure 4-39. IB Port Statistics InfiniBand Port StatisticsFigure 4-40. IB Port Statistics InfiniBand Statistics Port Configuration and Statistics Figure 4-41. Port Configuration and Statistics ButtonValues are Enabled or Disabled Figure 4-42. Port Statistics OverviewThe total number of octets of data received on the network. Pkts Pkts65to127Octets Power Supply Troubleshooting and Technical ReferenceSwitch Hardware ChecksA.1.3 OOB Ethernet RJ45 PortLeaf Module IB Ports A.1.4Invalid IP Address entered via Console Port Troubleshooting ScenariosInfiniBand Nodes cannot be seen in SilverStorm Fabric ViewerTroubleshooting Scenarios D000003-006 Rev. A