Q-Logic 9000 manual 43. SNMP Target Configuration Window

2 – Operations and Administration Configuration and Monitoring Features

Q

3.The SNMP Target Configuration window is displayed:

Figure 2-43. SNMP Target Configuration Window

The top section of the window, SNMP Target Addresses, allows the user to determine what type of SNMP traps are sent, and where they are sent. The rows provide an area for specifying multiple trap destinations. The bottom section of the window, SNMP Target Parameters, allows the user to configure each trap destination with version, optional security information, and filtering mechanisms.

The Apply button applies the current settings to either the SNMP Target Addresses or SNMP Target Parameters section.

NOTE:The Target Configuration window is used for viewing and modifying existing SNMP target entries. It is not used for creating new target entries.

To create a new target entry, use the following CLI command:

snmpTargetAddr add -n name -a addr [-p port] [-t timeout] [-r retry_count] [-l tag_list] [-v parameters] [-s storage_type]

For example:

To add a trap target with the IP address 192.168.0.123 that accepts SNMP v2c style traps:

snmpTargetAddr add -n traphost1 -a 192.168.0.123 -v "v2 params"

Or, to add the same target except using SNMP v1traps:

snmpTargetAddr add -n traphost1 -a 192.168.0.123 -v "v1 params"

2-26 D000003-006 Rev. A