Q-Logic 9000 manual Spine View Menu

Q

2 – Operations and Administration

NOTE: Use a value of 1 to access a remote host Fabric Manager or a remote embedded Fabric Manager. There is no need to specify a value if accessing a host Fabric Manager on the same host where sm_query is running.

-d <VAL>: the destination IP address or host name. This is used to connect to a remote instance.

Remote Options:

NOTE:These options are ignored if the -doption is not specified.

-h, -help: displays help information.

-c COMMUNITY: sets the community string.

2.3

Spine View Menu

For information on accessing the Spine View, refer to “Spine Module View” on page 2-7.

Figure 2-78. Spine View Menu

NOTE: For information on IB port statistics refer to the section “Port Statistics” on page 2-39.

D000003-006 Rev. A 2-57