2 – Operations and Administration Chassis Viewer

Q

Switch Field Replaceable Unit (FRU) Information

Power supply information

Fan information

Switch backplane information

2.1.4.3.1

LEDs and Sensors Tab

The LEDs and Sensors tab displays for the applicable hemisphere:

Switch component LED information for chassis status, chassis SMA, fan and power supplies.

Slot-based temperature and AC-power sensor data for the internal switching complex.

Figure 2-23. LEDs and Sensors Tab

NOTE: For a detailed explanation of physical LEDs on the hardware components, please refer to the section “9120 Component LEDs” on page 2-20.

2.1.4.3.2

System Tab

The System tab displays overall system information for the applicable hemisphere. This information includes the following items:

Out of Band LAN IP

The IP address of the switch. Note that changes to this field only take effect after a switch power cycle (i.e., shutting down the switch and powering it back up). The IP address of the switch can be changed by the administrator.

2-12

D000003-006 Rev. A

Page 24
Image 24
Q-Logic 9000 manual LEDs and Sensors Tab, System Tab