SRP Initiator Discovery and Configuration Button

3 – FVIC Configuration and Monitoring Features

NOTE: Before using this screen to discover hosts, the user must verify that InfiniBand connectivity has been established with each IB-enabled host connected to the switch.

Figure 3-26. SRP Initiator Discovery and Configuration Button

To discover and configure SRP initiators:

1.In the main status and navigation area, click on a FVIC.

2.From the FVIC menu, click on Configuration.

3.Click on SRP Initiator Discovery. The Fibre Channel SRP Initiator Configuration window is displayed:

Figure 3-27. Fibre Channel SRP Initiator Configuration Window

D000003-006 Rev. A

3-15

Q-Logic 9000 manual SRP Initiator Discovery and Configuration Button

Models: 9000

3 – FVIC Configuration and Monitoring Features

Figure 3-26. SRP Initiator Discovery and Configuration Button

Figure 3-27. Fibre Channel SRP Initiator Configuration Window

D000003-006 Rev. A