RAD Data comm LRS-24 Defining Card Configuration, Define Card Type, Empty Null Linked, Imode

LRS-24Installation and Operation Manual Appendix D CM-2 Management Commands

D.8 Defining Card Configuration

Purpose

Defines card type, name, and connection to a remote modem.

Format

NODE 13 DEF CRD

Procedure

➤To define card type, name, and connection:

• Type: NODE 13 DEF CRD <Enter>.

Information about all the cards in the hub is displayed. A typical form is shown in Figure D-18.

		DEFINE CARD TYPE
Slot					Type	Modem	Remote1	Remote2	Remote3	Remote4
Card	1			: EMPTY		NULL	LINKED	LINKED	LINKED	LINKED
Card	2			: EMPTY		NULL	LINKED	LINKED	LINKED	LINKED
Card	3			: IMODE		ASMi-31CQ(m)	LINKED	LINKED	LINKED	LINKED
Card	4			: EMPTY		NULL	LINKED	LINKED	LINKED	LINKED
Card	5			: EMPTY		NULL	LINKED	LINKED	LINKED	LINKED
Card	6			: EMPTY		NULL	LINKED	LINKED	LINKED	LINKED
Card	7			: EMPTY		NULL	LINKED	LINKED	LINKED	LINKED
Card	8			: IMODE		FOMi-E1/T1C(m)	LINKED	LINKED	LINKED	LINKED
Card	9			: IMODE		ASMi-31C(m)	LINKED	LINKED	LINKED	LINKED
Card			10 : IMODE			ASMi-24C(m)	LINKED	LINKED	LINKED	LINKED
Card			11 : IMODE			ASMi-31C(m)	LINKED	LINKED	LINKED	LINKED
Card			12 : IMODE			ASMi-50C(m)	LINKED	LINKED	LINKED	LINKED

Figure D-18. Define Card Type Screen

Each slot number shows the type of modem, name, and connection to a remote modem.

For parameters Type and Modem:

•If Type is IMODE both fields are read-only.

•If Type is EMPTY you can define Type and Modem name, only when in Terminal Mode.

•If Type is SMODE you can define Modem name.

Remote1 defines whether the modem is connected to (LINKED) or disconnected from (UNLINKED) a remote modem. A double modem card, such as FOMi-E1/T1CD, is defined for two remote modems - Remote1 and Remote2.

Defining Card Configuration D-19

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com