RAD Data comm LRS-24 operation manual Defining I/O Module Operational Parameters, Node nn DEF PRM

Appendix D CM-2 Management Commands LRS-24Installation and Operation Manual

A card containing four modems, such as ASMI-31CQ, is defined for four remote modems.

Note When you select UNLINKED for Remote1, Remote2, Remote3, or Remote4, then traps from the remote modem are masked.

D.9 Defining I/O Module Operational Parameters

Purpose

Defines the operational parameters for an I/O module.

This command is relevant only for I/O modules that do not support direct management by SNMP or by supervision terminal, for example ASMi-24, ASMi-30, ASMi-31, ASMi-32, etc. For such modules, the CM-2 module provides the terminal interface.

Format

NODE nn DEF PRM

Procedure

➤To define I/O Module Operational Parameters:

• Type: NODE nn DEF PRM <Enter>.

nnstands for the node number of the desired module, in the range of 1 through 12.

The first line of the module data entry form appears (see Figure D-19).

D-20 Defining I/O Module Operational Parameters

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com