RAD Data comm LRS-24 operation manual CM2 Download via Xmodem, CM2 Download via CM2 Flash

LRS-24Installation and Operation Manual Appendix D CM-2 Management Commands

CM2 Download via XMODEM

In this option you can define one parameter. Remember that the terminal connected to the CM-2 must be configured at 38.4 kbps, 8-bit, no parity, one stop bit.

➤To download via XMODEM: 1. Type 2.

Note After typing the parameter data, press <Enter> to start the download process. After the message “The CM-2 is waiting to the XMODEM data. Start the process within one min.” appears, you must start the XMODEM server. When successful, the message “The download action is done” appears. If after one minute the XMODEM server has not connected properly to the CM-2, the message The download action has failed appears.

CM2 Download via CM2 FLASH

➤To download via CM2 FLASH: 1. Type 3.

MODEMS DOWNLOAD VIA CM2 FLASH
CM2 containing the following versions:
ID	Modem Type	Version No.	Date	Size	Location
1	NULL	0.0	0- 0- 0	0k	EMPTY
2	NULL	0.0	0- 0- 0	0k	EMPTY
3	NULL	0.0	0- 0- 0	0k	EMPTY
Please choose the ID number
1.	ID NUMBER: 1
2.	Download to Remote Modems: N/A

To change the ID number press f to scroll forward or b to scroll backward

Figure D-6. Modems Download Via Cm2 Flash Screen

Change CM-2 Software Version

➤To change CM-2 Software Version:

1. Type 4.

The Change CM2 Software Version screen appears.

Defining CM-2 Download Parameters D-11

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com