Appendix D CM-2 Management Commands LRS-24 Installation and Operation Manual
D-32 Defining Auto-Configuration
Creating Files from an Existing Configuration
➤ To create a file from the existing configuration:
1. Type 3 from the Auto-Configuration Menu.
The Create File Form Existing Configuration screen appears (see
Figure D-36).
CREATE FILE FORM EXISTING CONFIGURATION
Create file from: [HUB/MODEM]
Slot: [NUMBER] Modem: {NUMBER} (relevant only for modem files)
User String(up to 22 characters): [user_string]
Save file to HUB: [NO/YES]
Send file via: [N/A/TFTP/XMODEM]
To select an option press ‘f for forward or ‘b’ for backward.
Figure D-36. Create File Form Existing Configuration Screen
2. Select method to create file:
− HUB: the file configuration is created from all the modems that are
presently in the hub. The cursor jumps to User String.
− MODEM: enter the Slot Number and Modem Number of the modem
whose configuration you want to save.
3. Select YES if you want to save the file.
4. If you want to send the file, select the method for sending the file to the
station:
− TFTP: the Upload/Download via LAN screen appears (see Figure D-33)
− XMODEM: a message appears that you can start receiving the file
(see Figure D-35).
Viewing Configuration Files in the Hub
➤ To view configuration files in the LRS-24 hub:
• Type 4 from the Auto-Configuration Menu.
The View Configuration Files in Hub screen appears (see Figure D-37).
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com