RAD Data comm LRS-24 operation manual Introduction, Mechanical Data

Chapter 2

Installation and Setup

This chapter provides installation and operation instructions for the LRS-24 system, and the basic system configuration of the power supply (PS) and common logic (CM-1 and CM-2) modules. It includes the following topics:

•Site requirements and prerequisites

•Equipment needed

•Package contents

•Installation and setup

•Interfaces and connections

•Initial operation and basic checks

See Chapter 3 for management via a CM-1 module and Chapter 4 for management via a CM-2 module.

2.1 Introduction

If LRS-24 includes a CM-2 module, you must configure management parameters of the CM-2 module before the management functions are operable. This procedure is explained in Chapter 4.

After installing the basic system, install the user modules according to the system installation plan, as explained in the Installation and Operation Manual of the individual modems.

No internal settings, adjustment, maintenance, and repairs may be performed by either the operator or the user; such activities may be performed only by a

skilled technician who is aware of the hazards involved.

Warning Always observe standard safety precautions during installation, operation, and maintenance of this product.

Mechanical Data

Figure 2-1provides mechanical data on the LRS-24F chassis. Figure 2-2provides mechanical data on the LRS-24B chassis.

Introduction 2-1

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com