RAD Data comm LRS-24 Hub Configuration Operations, To execute a Hub Configuration file

Appendix D CM-2 Management Commands LRS-24Installation and Operation Manual

Hub Configuration Operations

You can send or execute Hub Configuration files.

➤To execute a Hub Configuration file:

1.Select 1 from the Auto-Configuration Menu.

2.Select file 4 or 5 (if the Hub files exist) in the Edit Configuration screen (see Figure D-23).

The Operations for HUB Configuration screen appears (see Figure D-24).

OPERATIONS FOR HUB CONFIGURATION FILE

Execute file: [NO/YES]

Send file via: [N/A/TFTP/XMODEM]

To select an option press ‘f’ for forward or ‘b’ for backward.

Figure D-24. Operations For Hub Configuration File

3. Select YES to execute the configuration.

An error message is returned if the configuration specifies parameters but:

ƒSlot is empty

ƒModem in slot does not exist

ƒType of modem in slot doesn’t match type in file configuration.

4.Select method for sending file to the station.

−N/A: file is not sent

−TFTP: Upload via LAN screen appears (see Figure D-25)

−XMODEM

5.Press <Enter> to continue the process.

Upload via LAN

IP Address of TFTP client: [000.000.000.000]

Filename: [Filename]

Figure D-25. Upload via LAN Screen

6. Enter station IP Address and Filename.

After the TFTP process has completed, a confirmation screen will appear (see Figure D-26).

D-26 Defining Auto-Configuration

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com