Roland PCR-30, PCR-50, PCR-80 MIDI Channel mode (MIDI CH)

Basic operation

MIDI Channel mode (MIDI CH)

1

This mode lets you set the transmission channel (current channel) of the keyboard and bender lever.

Each controller has its own independent transmission channel setting. However, if OMNI mode (p. 149) is on, the controllers will also transmit on the current channel you specify here.

3 1 2

Press the [MIDI CH] button.

The [MIDI CH] button will light. The display will show the current channel setting.

* The [HEX] or [DECIMAL] button will also light according to the input mode (p. 158).

2

3

Use the [DEC] [INC] buttons or the [0]–[F]keys of the keyboard to specify the desired channel number.

DEC Change the current value by -1

INC Change the current value by +1

The input value

0–F HEX...0–FDECIMAL...1–16

Press the [ENTER] button.

The setting will be cancelled if you press another button instead of the [ENTER] button. The current channel has now been set.

118