Roland PCR-30, PCR-50, PCR-80 English, Deutsch, Español, Français, Italiano

Installing & Setting Up the Driver (Windows)

5	Click [OK] to close the System Properties dialog box.
6	Exit all currently running software (applications).
	Also close any open windows. If you are using virus checking or similar
	software, be sure to exit it as well.
7	Prepare the CD-ROM.
	Insert the CD-ROM into the CD-ROM drive of your computer.
8	Click the Windows start button. From the menu that appears, select
	“Run...”.

Open the “Run...” dialog box.

fig.2-3_30

In the dialog box that appears, input the following into the “Open” field, and click [OK].

D:\Driver\USB_XP2K\SETUPINF.EXE

*The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive.

10The SetupInf dialog box will appear.

You are now ready to install the driver.

11Use the USB cable to connect the PCR-30/50/80to your computer.

1.With the power switch turned OFF, connect the AC adaptor to the

PCR-30/50/80.

2.Connect the AC adaptor to an electrical outlet.

3.Use the USB cable to connect the PCR-30/50/80to your computer.

12Set the PCR-30/50/80’s power switch to the ON position.

Near the task bar, your computer will indicate “Found New Hardware”. Please wait.

Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

EnglishDeutschFrançaisItalianoEspañol