Edit mode (EDIT)
■TEMPO ASSIGN
You can assign a controller to adjust the speed
*In order to transmit F8 Clock messages, the F8 CLOCK setting must be “ON”. (➔“F8 CLOCK ON/OFF” (p. 154))
1
2
Press the [EDIT] button.
The display will indicate “EDT.”
Slightly move the controller to which you want to assign TEMPO. In the case of a button, press that button.
The display will indicate the number of the selected controller.
3
4
Confirm what’s indicated and press the [ENTER] button.
Press the [TEMPO] key.
The display will indicate “TMP”.
5
6
Confirm what’s indicated and press the [ENTER] button.
If you are making the assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))
* In the case of a button, the value will be fixed at maximum (250) for ON, and minimum (20) for OFF.
■NO ASSIGN
1
2
3
Here’s how you can cancel the message assigned to a controller. Once its assignment is cancelled, no message will be transmitted when you operate that particular controller.
Press the [EDIT] button.
The display will indicate “EDT”.
Slightly move the controller whose assignment you want to cancel. In the case of a button, press that button.
The display will indicate the number of the selected controller.
Confirm what’s indicated and press the [ENTER] button.
146