Edit mode (EDIT)
About the display in Bulk mode
| Receive | SINGLE | Waiting to receive |
|
1st digit: |
| BULK | (blinking) |
|
|
|
|
| |
indicates Receive mode or |
|
| 3rd digit: indicates | |
Transmit mode | Transmit | ALL | Waiting to transmit | |
|
| BULK | (blinking) | Transmitting/Receiving/Waiting states |
|
|
|
| receiving |
| 2nd digit: |
| Transmitting |
|
|
|
|
| |
Single Bulk or All Bulk |
|
| transmitting | |
6
7
Transmit bulk data from your sequencer or other device.
Specify “PCR” (Mac OS 9/8: PCR 1) as the MIDI output device for your sequencer software. For details on this setting, refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to “About the ports when using a USB connection” (p. 159).
When the PCR finishes receiving the bulk data, the display will indicate “END”.
fig.err
8
If the data could not be received correctly, the display will blink “ERR”. If this occurs, press the [CANCEL] button to cancel the “ERR” display.
Once "ERR" has been dismissed, perform the bulk reception procedure over again, from step 1.
Confirm what’s indicated and press the [ENTER] button.
152