Edit mode (EDIT)

Advanced modes 3 and 4

Advanced mode 3 lets you assign the Program Change Decrement function (PC DEC) to a controller.

Advanced mode 4 lets you assign the Program Change Increment function (PC INC) to a controller.

1.Press the [EDIT] button.

2.Slightly move the controller to which you want to assign Program Change DEC/INC. In the case of a button, press that button.

The display will indicate the number of the selected controller.

3.Confirm what’s indicated, and press the [ENTER] button.

4.Press the [PROGRAM CHANGE] key and then press key [3] or [4].

5.Press the [ENTER] button.

Program Change Decrement function (PC DEC)

This transmits a program change that is one less than the previously transmitted program change number.

Program Change Increment function (PC INC)

This transmits a program change that is one greater than the previously transmitted program change number.

The PC DEC or PC INC is transmitted on the current channel, just as in “Program Change mode (PROGRAM CHANGE)” (p. 119). The value that is actually transmitted will appear in the display.

*In the explanation here, the "previously transmitted program number" refers to the one that was last transmitted by Advanced Mode 3 or 4 or in “Program Change mode (PROGRAM CHANGE)”

(p. 119).

*Program changes transmitted by basic mode or advanced modes 1 and 2 will not affect the increment/ decrement functions.

137