Installing & Setting Up the Driver (Macintosh)

■FreeMIDI settings

1Use the USB cable to connect the PCR-30/50/80to your computer.

1.With the power switch turned OFF, connect the AC adaptor to the

PCR-30/50/80.

2.Connect the AC adaptor to an electrical outlet.

3.Use the USB cable to connect the PCR-30/50/80to your computer.

2Set the PCR-30/50/80’s power switch to the ON position.

3From the CD-ROM, copy the Driver E (Mac OS 9, 8) – FreeMIDI Setting folder onto the hard disk of your Macintosh.

4Open the FreeMIDI Applications folder from the location into which you installed FreeMIDI, and double-click the FreeMIDI Setup icon to start it up.

5The first time you start up, use the following procedure.

1.A dialog box saying “Welcome to FreeMIDI!” will appear. Click [Continue].

2.When the FreeMIDI Preferences dialog box appear. Click [Cancel].

3.The About Quick Setup dialog box will appear. Click [Cancel].

6From the File menu, choose Open.

7Select PCR from the FreeMIDI Setting folder you copied in step 3, and click [Open].

8Verify that MIDI transmission and reception occur correctly. From the MIDI menu, choose Check Connections.

Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers

and other devices.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

When “OMS is installed

on this computer...”

appears, click [FreeMIDI].

If you are unable to select Open, make settings as

follows.

1.From the File menu, choose FreeMIDI Preference.

2.Uncheck “Use OMS when available.”

3.Close FreeMIDI.

4.Return to step 4 and continue the procedure.

English

Deutsch

Français

Italiano

Español

29