Edit mode (EDIT)

13In the case of Advanced mode 4, specify the upper and lower limits.

14Specify the output port. (➔“Specifying the port” (p. 159))

15If you are making an assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))

Here are some examples of inputting various actual system exclusive messages.

●GM2 System On

F0 7E 7F 09 03 F7

Here’s how to assign a GM2 System On system exclusive message in Basic mode.

1.Press the [EDIT] button.

The display will indicate “EDT”.

2.Slightly move the controller to which you want to assign the system exclusive message. In the case of a button, press that button.

The display will indicate the number of the selected controller.

3.Confirm what’s indicated, and press the [ENTER] button.

4.Press the [SYSTEM Ex.] key. The display will indicate “SE0”.

5.Confirm what’s indicated, and press the [ENTER] button.

The display will indicate “F0”, which is the first byte (beginning status) of a system exclusive message. This cannot be changed. (This cannot be changed.)

6.Confirm what’s indicated, and press the [ENTER] button.

7.Use the [7] and [E] keys to input the second byte “7E”.

8.Confirm what’s indicated, and press the [ENTER] button.

9.Use the [7] and [F] keys to input the third byte “7F”.

10.Confirm what’s indicated, and press the [ENTER] button. Input the fourth and fifth bytes in the same way.

11.Finally, use the [F] and [7] keys to input the ending status byte “F7”.

12.Confirm what’s indicated, and press the [ENTER] button.

13.Specify the output port. (➔“Specifying the port” (p. 159))

14.If you are making an assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))

The GM2 System On message has now been assigned.

142