Roland PCR-30, PCR-50, PCR-80 30

Installing & Setting Up the Driver (Macintosh)

fig.3-13_40

Try playing the keyboard of the PCR-30/50/80. If the number 2 or 3 in the diagram at right blinks, the settings have been made correctly.

If a MIDI sound module is connected to the PCR-30/50/80's MIDI OUT connector, click the MIDI connector icon shown in the diagram at the right. If you hear sound, the settings have been made correctly.

10Once again choose the MIDI menu command Check Connections to end the test.

11From the File menu, choose Quit to exit FreeMIDI Setup.

12Make MIDI device settings on your sequencer software. For details on the MIDI OUT/IN device to select, refer to “About the ports when using a USB connection” (p. 159).

This completes the series of steps needed to connect the PCR-30/50/80 to the Macintosh, install the MIDI driver, and make the driver settings.

For details on port, refer to

“About the ports

when using a USB

connection” (p. 159).

For details on connecting a MIDI sound module, refer to the owner's manual for your MIDI sound module.

For details on MIDI device settings, refer to the owner's manual for the software you are using.