Edit mode (EDIT)

Advanced mode 1–3

Advanced mode 1 of AFTERTOUCH ASSIGN lets you specify the upper and lower limits of the aftertouch value in addition to the items of Basic mode. Advanced modes 2 and 3 let you specify an aftertouch message for an individual note (Polyphonic Key Pressure) instead of specifying the channel.

1.Press the [EDIT] button.

2.Slightly move the controller to which you want to assign an Aftertouch message. In the case of a button, press that button.

The display will indicate the number of the selected controller.

3.Verify that the display indicates the correct controller, and press the [ENTER] button.

4.Press the [AFTERTOUCH] key and then press a key [1]–[3]. The display will indicate the selected mode.

fig.at1

5. Press the [ENTER] button.

6.Input the channel.

7.Press the [ENTER] button.

8.If you are using Advanced modes 2 or 3, input the note number.

9.If you are using Advanced modes 2 or 3, Press the [ENTER] button.

10.If you are using Advanced modes 1 or 3, specify the upper limit and lower limit of the value as described in “Aftertouch Assign upper/lower limit and port settings”

(p. 131), and specify the output port.

11.If you are making an assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))

130