*1 Reference

Edit mode (EDIT)

■AFTERTOUCH ASSIGN

Here’s how to assign an Aftertouch message to a controller.

Mode

Keyboard

Message

Value range

Port

 

 

 

 

 

Basic mode

0

Channel Pressure

00–7FH

Port 1

Advanced mode 1

1

Channel Pressure

Assignable

Assignable

Advanced mode 2

2

Polyphonic Key Pressure

00–7FH

Port 1

Advanced mode 3

3

Polyphonic Key Pressure

Assignable

Assignable

Basic mode

1

2

Press the [EDIT] button.

The display will indicate “EDT.”

Slightly move the controller to which you want to assign an Aftertouch message. In the case of a button, press that button.

The display will indicate the number of the selected controller.

3

4

Verify that the display shows the correct controller number, and press the [ENTER] button.

Press the [AFTERTOUCH] key.

The display will indicate “AT0”.

5

Verify that the display is correct, and press the [ENTER] button. The display will indicate “C--”.

6

7

8

Input the channel. Use the [DEC][INC] buttons or the [0]–[F]keys to specify the channel.

Press the [ENTER] button.

If you are making an assignment for a button, specify the button mode. (➔“Specifying the button mode” (p. 158))

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode 129 of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,

or will blink if the value is different.