Roland PCR-30, PCR-50, PCR-80 manual SYSTEM

Edit mode (EDIT)

SYSTEM

1

Here’s how you can make various system settings for the PCR-30/50/80.

Press the [EDIT] button.

The display will indicate “EDT”.

2

3

Press the [SYSTEM] key.

The display will indicate “SY0”.

Use the [0]–[8]keys to specify the System setting that you want to set, and then press the [ENTER] button.

Confirm what’s indicated and use the appropriate method to make the setting.

Key-	Mode	Content of the setting	Default	Setting
board				method
0	F8 CLOCK ON/OFF	Specify whether F8 Clock is to be	OFF	A (p. 155)
		transmitted.
1	F8 CLOCK DEFAULT	If “F8 CLOCK ON/OFF” is ON,	120	B (p. 155)
	TEMPO	specify the default value of the F8
		Clock. After the power is turned on,
		this tempo will continue to be output
		until you move a controller to which
		TEMPO is assigned.
2	F8 CLOCK PORT SET	If “F8 CLOCK ON/OFF” is ON,	PCR 1	C (p. 155)
		specify the port from which the F8
		Clock is to be transmitted.
3	VELOCITY OFFSET	The value you specify here will be	0	B (p. 155)
		added to the velocity of the notes
		played from the keyboard.
		* If the result of the addition would
		exceed 7FH, the velocity will be 7FH.
4	KEYBOARD PORT SET	Specify the port from which	PCR 1	C (p. 155)
		messages produced by the BENDER
		lever of the keyboard are to be
		transmitted.
5	H-ACTIVITY ON/OFF	Turn this ON if you are using certain	OFF	A (p. 155)
		applications (such as Pro Tools LE).
		When ON, “90 00 7F” will be output
		from PCR 2 approximately every
		500 ms.
6	USB DRIVER MODE	Specify the type of driver used	Original	D (p. 156)
		for USB connection.	Driver
7	STARTUP MEMORY	Specify the memory that will be	GM2	E (p. 156)
		selected when the power is turned
		on.
8	FACTORY RESET	Restore all settings of the PCR-30/	-	F (p. 156)
		50/80 to their factory-set condition.

154