Basic operation

Memory mode (MEMORY)

This mode lets you recall one of the stored memory sets into the current memory (p. 148). When the PCR-30/50/80 is shipped, its internal memory contains sixteen different settings. For details on the contents of each memory number, refer to “Memory sets” (p. 164).

If you edit the controller settings of a memory you recall, and want to keep your changes, you must save the memory before powering down the PCR-30/50/80. For the procedure, refer to “EDIT-Save”p. 148.

For details on customizing (editing) the controller settings, refer to “Edit mode (EDIT)” (p. 125).

fig.memory-1_80

1

2

3

312

Press the [MEMORY] button.

The [MEMORY] button will light. The display will indicate the memory number that you selected most recently.

Use the [DEC][INC] buttons or the [0]–[F]keys of the keyboard to specify the memory number that you want to recall.

Press the [ENTER] button.

The setting will be cancelled if you press another button instead of the [ENTER] button. The memory has now been recalled.

121