Installing & Setting Up the Driver (Windows)

■Windows Me/98 users

1With the PCR-30/50/80 disconnected, start up Windows.

Disconnect all USB cables except for a USB keyboard and USB mouse (if used).

2Exit all currently running software (applications).

Also close any open windows. If you are using virus checking or similar software, be sure to exit it as well.

3Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive of your computer.

4Click the Windows Start button. From the menu that appears, select

“Run...”.

Open the “Run...” dialog box.

fig.2-19a_30

5

In the dialog box that appears, input the following into the “Open” field, and click [OK].

D:\Driver\USB_ME98\SETUPINF.EXE

*The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive.

Once the connections have been completed, turn on power to your various

English

Deutsch

Français

6

7

8

The SetupInf dialog box will appear.

You are now ready to install the driver.

Use the USB cable to connect the PCR-30/50/80to your computer.

1.With the power switch turned OFF, connect the AC adaptor to the

PCR-30/50/80.

2.Connect the AC adaptor to an electrical outlet.

3.Use the USB cable to connect the PCR-30/50/80to your computer.

Set the PCR-30/50/80’s power switch to the ON position.

devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

Italiano

Español

21