Installing & Setting Up the Driver (Macintosh)

fig.3-10

 

 

9 From the File menu, choose

A diamond mark (◊ ) indicate in the settings are enabled.

Make Current.

 

 

 

 

If you are unable to select Make Current, it has already been applied, and you may continue to the next step.

10Verify that MIDI transmission and reception can be performed correctly. From the Studio menu, choose Test Studio.

fig.3-22_50

11Try playing the keyboard of the PCR-30/50/80. If the arrow beside number 2 or 3 in the diagram at right blinks, the settings have been made correctly.

When you move the mouse cursor near the MIDI connector icon, the cursor will change to a  shape.

If a MIDI sound module is connected to the PCR-30/50/80's MIDI OUT connector, click the MIDI connector icon shown in the diagram at the right. If you hear sound, the settings have been made correctly.

12Exit OMS Setup.

From the File menu, choose [Exit]. If the AppleTalk confirmation dialog box appears, click [OK] to close the dialog box.

13Make MIDI device settings on your sequencer software. For details on the MIDI OUT/IN device to select, refer to “About the ports when using a USB connection” (p. 159).

This completes the series of steps needed to connect the PCR-30/50/80 to the Macintosh, install the MIDI driver, and make the driver settings.

For details on port, refer

to “About the ports

when using a USB

connection” (p. 159).

For details on connecting a MIDI sound module, refer to the owner's manual for your MIDI sound module.

For details on MIDI device settings, refer to the owner's manual for the software you are using.

28