Roland PCR-30, PCR-50, PCR-80 If “What action do you want Windows to take?” is set to “Warn”, If “What action do you want Windows to take?” is set to “Block”

Installing & Setting Up the Driver (Windows)

13The Found New Hardware Wizard will appear.

Make sure that the screen indicates “EDIROL PCR”, select“Install from a list

or specific location (Advanced)”, and click [Next].

fig.2-7

14The screen will indicate “Please

choose your search and installation options”.

Select “Don’t search. I will choose the driver to install”,

and click [Next].

15Make sure that the “Model” field indicates “EDIROL PCR”, and click [Next]. Driver installation will begin.

If the “What action do you want Windows to take?” setting was not set to “Ignore”, a “Hardware Installation” dialog box will appear.

If “What action do you want Windows to take?” is set to “Warn”

1.Click [Continue Anyway].

2.Continue the installation.

If “What action do you want Windows to take?” is set to “Block”

1.Click [OK].

2.When the “Found New Hardware Wizard” appears, click [Finish].

3.Perform the installation as described in the “Troubleshooting” section on Device Manager shows “?”, “!”, or “USB Composite Device” (p. 172).

fig.2-9_30

16The Insert Disk dialog box will appear. Click [OK].

17The Files Needed dialog box will appear.

Input the following into the “Copy files from” field, and click [OK].

D:\Driver\USB_XP2K

*The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive.

The Insert Disk dialog

may not appear. In that

case, proceed to step 17.