Edit mode (EDIT)

■Transmit mode

1

Press the [EDIT] button.

The display will indicate “EDT”.

2

3

4

5

Press the [BULK] key.

Press the [1] key.

The display will blink “BLT” (Bulk Transmit).

Confirm what’s indicated and press the [ENTER] button.

The display will indicate “TS”, and the “S” will blink.

Use the [DEC] [INC] buttons or the [0] [1] keys to select the mode.

0

SINGLE BULK

The currently recalled memory (the current

memory) will be transmitted as bulk data

 

 

1

ALL BULK

All memories (memories 1–F) will be transmitted

as bulk data.

 

 

6

7

Confirm what’s indicated and press the [ENTER] button.

The third digit of the display will blink, and the PCR-30/50/80 will wait to transmit bulk data.

8

9

Press the [ENTER] button.

On your sequencer software, specify “PCR 2” as the MIDI input device. For details on this setting, refer to the manual of your sequencer software.

For details on the port that will be used to transfer bulk data, refer to “About the ports when using a USB connection” (p. 159).

When the PCR finishes receiving the bulk data, the display will indicate “END”.

10Confirm what’s indicated and press the [ENTER] button.

153